F-150 Mechanical Explorer
All parts

AIR INTAKE

Throttle Body

The valve that controls how much air the engine gets when you press the pedal.

Identification & Position

Part name
Throttle Body
Location
Where the intake tube meets the upper intake manifold, on top of the engine.
What it does
Opens and closes a plate to meter air into the intake manifold.
What it connects to
  • Air intake tube
  • Upper intake manifold
  • Throttle position sensor circuit
  • Idle air control system where fitted
  • Throttle linkage or cable
What is above it
Intake tube and open bay.
What is below it
Upper intake manifold.
What is in front of it
Intake plumbing toward the front of the bay.
What is behind it
Firewall side of the engine bay.
Must be removed to access it
  • Air intake tube
  • Electrical connectors
  • Throttle linkage / cable
  • Any vacuum hoses attached
  • Throttle body fasteners

Show me how to take this apart

Dependency path — the order things must come off

Reveals the order of everything that has to be disconnected or removed to reach this part.

Symptoms & Testing

Common failure symptoms
  • High or erratic idle
  • Sticking pedal feel
  • Stalling when coming to a stop
  • Check engine light
How to test it
  1. 1. Inspect the bore and plate for carbon build-up.
  2. 2. Check throttle plate movement by hand with the engine off.
  3. 3. Read throttle position data with a scan tool.
  4. 4. Check for vacuum leaks at the gasket.

Symptoms narrow the list of possibilities. They never confirm a diagnosis on their own — test before replacing anything.

Part Numbers

OEM part numberVerification Required
VERIFY FOR YOUR VEHICLE

Enter the Ford part number for your exact configuration.

Aftermarket cross-referenceVerification Required
VERIFY FOR YOUR VEHICLE

Enter the aftermarket cross-reference you intend to use.

Part numbers vary by engine, drive type and build date. Nothing is guessed here — enter yours from a verified source on the admin page so it stays with this component.

Difficulty & Time

Removal difficulty
2/5 Easy DIY
Installation difficulty
2/5 Easy DIY
Approximate labour timeVerification Required
VERIFY FOR YOUR VEHICLE

Safety Warnings

  • Let the engine cool. Do not spray cleaner near hot surfaces or sensors.
  • Gasket condition matters — a leak here causes idle faults.

Tools Needed

  • Socket set (metric and imperial)Almost every fastener on the truck
  • ScrewdriversClamps, clips and covers
  • Torque wrenchAny fastener with a specification — mandatory for engine work
  • OBD-II scan toolReading codes and live sensor data
Full toolbox

Orientation

Where to look for it

Side
Centre of the engine
Front / rear
Toward the rear/top of the engine on most layouts — confirm on your truck
Above / below
On top of the intake manifold
View from every angle

Related Parts

Real photos online

Opens photos of "Throttle Body" on other sites

These open other people's websites in a new tab. Photos there belong to whoever took them, so they are shown on their own site rather than copied into this app — and they may be a different year, engine or trim, so always compare against your own truck.

Related Diagrams

Other parts in this system