F-150 Mechanical Explorer
All parts

IGNITION

Ignition Coil

Turns low battery voltage into the very high voltage needed to make a spark.

Identification & Position

Part name
Ignition Coil
System
Ignition
Location
Mounted on or near the engine. Exact position depends on the engine configuration — confirm on your truck.
What it does
Builds and releases high voltage into the plug or plug wire at the right instant.
What it connects to
  • Ignition primary circuit / PCM
  • Spark plug wires or plugs
  • Ground path
What is above it
Verification Required
What is below it
Verification Required
What is in front of it
Verification Required
What is behind it
Verification Required
Must be removed to access it
  • Battery negative terminal
  • Coil electrical connector
  • Plug wires where fitted
  • Mounting fasteners

Show me how to take this apart

Dependency path — the order things must come off

Reveals the order of everything that has to be disconnected or removed to reach this part.

Symptoms & Testing

Common failure symptoms
  • Misfire
  • Rough running under load
  • Check engine light
  • Hard starting
How to test it
  1. 1. Scan for misfire counts by cylinder.
  2. 2. Measure coil primary and secondary resistance where specified.
  3. 3. Inspect for tracking, cracks and carbon paths.

Symptoms narrow the list of possibilities. They never confirm a diagnosis on their own — test before replacing anything.

Part Numbers

OEM part numberVerification Required
VERIFY FOR YOUR VEHICLE

Enter the Ford part number for your exact configuration.

Aftermarket cross-referenceVerification Required
VERIFY FOR YOUR VEHICLE

Enter the aftermarket cross-reference you intend to use.

Part numbers vary by engine, drive type and build date. Nothing is guessed here — enter yours from a verified source on the admin page so it stays with this component.

Difficulty & Time

Removal difficulty
2/5 Easy DIY
Installation difficulty
2/5 Easy DIY
Approximate labour timeVerification Required
VERIFY FOR YOUR VEHICLE

Safety Warnings

  • Ignition voltage can injure. Do not handle live ignition components with the engine running.

Tools Needed

  • Digital multimeterVoltage, ground and voltage-drop testing
  • Socket set (metric and imperial)Almost every fastener on the truck
  • OBD-II scan toolReading codes and live sensor data
Full toolbox

Related Parts

Real photos online

Opens photos of "Ignition Coil" on other sites

These open other people's websites in a new tab. Photos there belong to whoever took them, so they are shown on their own site rather than copied into this app — and they may be a different year, engine or trim, so always compare against your own truck.

Related Diagrams

Other parts in this system